SusiAir PILATUS PORTER PC6, Maintenance Program

Page: 248 / 248

Form No. ASI/MD-90 Revision 3 – July 2020 Page 8 of 8
NO. DESCRIPTION MECH. ENG.
8 If the answer to 7 above is NO then charge the battery for 13 Hours.
During the constant – current charge, the battery terminal voltage may rise as high
as 35 VDC, before the voltage will stabilize at approx. 31 VDC. This occurrence is
normal and will not degrade the battery.
9 After 13 hours remove the battery from the Test Set Up. Allow it to stand with no
further charging or discharging activity for at least 18 hours, before conducting
further tests.
10 Make the appropriate entry in the Inspection Work Package / additional worksheet,
that Main Battery Capacity check has been performed.
Attach a serviceable label with date of capacity check and store in accordance with
Hawker document F2602-0032 (24-32-35) Sealed Lead Acid Battery PN
9750W0538 procedures, until returned to service.
MAINTENANCE RELEASE
I hereby certify that aircraft parts and component mentioned above has been inspected and
maintained in accordance with the Maintenance Program and meets requirements of applicable
Civil Aviation Safety Regulations that is determined to be in an airworthy condition.
Name : .......................................
Signature : .......................................
Authorization Card’s No. : .......................................
Date : .......................................