background image

 

27

 
 
 
 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

NORTH AMERICAN WARRANTY 

      

     All  dispensing  equipment manufactured by A.C. Dispensing Equipment Inc. is 
warranted against defects in materials and workmanship for a period of one (1) year 
from the date of purchase.     
     A. C. Dispensing Equipment Inc.'s obligation under this warranty is limited to the 
repair of defects as outlined by an A. C. Dispensing Equipment Inc. factory-
authorized service agency or one of its sub-service agencies.   
     This Warranty does not apply to installation or problems because of installation.  
This Warranty does not apply to normal preventative maintenance, maintenance or 
adjustment.     
     THIS  WARRANTY  WILL  BE  NULL AND VOID IF THE WARRANTY 
REGISTRATION CARD IS NOT RETURNED TO A. C. DISPENSING EQUIPMENT 
INC. WITHIN 60 DAYS OF PURCHASE.   

 

      This warranty is subject to the following conditions: 

  This warranty applies to the original owner only and is not assignable.   

  Only pre-authorized service agencies directed by A.C. Dispensing Equipment Inc. 

are to be utilized. 

  Should any product fail to function in its intended manner under normal use within 

the limits defined in this warranty, at the option of A. C. Dispensing Equipment Inc. 
such product will be repaired or replaced by A.C. Dispensing Equipment Inc. or its 
Authorized Service Agency.  A. C. Dispensing Equipment Inc. will be responsible 
only for charges incurred or service performed by its Authorized Service Agencies.  
The use of other than A. C. Dispensing Equipment Inc. Authorized Service Agencies 
will void this warranty and A. C. Dispensing Equipment Inc. will not be responsible 
for such work or any charges associated with such work. The closest A. C. 
Dispensing Equipment Inc. Authorized Service Agency must be used and must be 
dispatched by A. C. Dispensing Equipment Inc.   

 

TIME PERIOD:   
One year on parts and labor, effective from the date of purchase.  The Authorized 
Service Agency may, at its option, require proof of purchase.  Parts replaced under 
this Warranty are warranted for the unexpired portion of the original product 
warranty only.  

 

24-hour Toll-Free Service is available at 

1-888-777-9990 or 1-902-865-9602 

A service consultant is available to assist you during our normal business hours.  All 
service-related issues will be addressed by a return telephone call the next business 
day. 
 
WARRANTY PROCEDURE:   

 

 

1.  Secure the model and serial number from the data tag on the lower left side of 

the dispenser.  

2.    Call the number provided on the service label on the dispenser. 
3.   Our technical support staff will discuss the issue with you and, if necessary, 

dispatch a technician to your location for repairs. If after-hours or emergency 
service is required, A.C. Dispensing Equipment Inc. will not be responsible for 
any additional charges.  

4.    To order parts, call the service center and the appropriate parts will be sent to 
       your location or that of the servicing agency.                              

(continued on page 28)

Summary of Contents for AC-FS5 FlavorShot





























Reviews: