14
To Reset Drink Count Data:
1. Press Prime button and hold for 2 seconds. Release the Prime button.
2. Press Clean button and hold for 2 seconds.
3. Press Flavor OR Modifier buttons
4. Press Reset button to reset drink count for that drink combination
5. To Exit: a. Press the Prime Button and hold for 2 seconds.
b. Press the Clean Button and hold for 2 seconds.
OR repeat Resets as needed for combinations counted.
LOW LEVEL INDICATOR
The Low Level Indicator is the red LED at the top of each flavor selection
button. This LED will flash after 750 ml have been dispensed from the
tank. Note that approximately 200 ml of flavor is left to be dispensed from
the tank when the light begins to flash.
Once the LED begins to flash, the tank can be refilled with 750 ml of flavor.
LOW LEVEL LOCKOUT
After the Low Level Indicator begins to flash and when approximately 100
ml remain in the tank, the Indicator Light will stay on solid red. A double
beep sounds when the lockout begins, and the LCD will display “Refill
Tank”. Once the Low Level Indicator is solid red, the tank must be refilled
and reset before dispensing can continue. See page 11.
RED LED
- flashing on flavor selection button – indicates low level.
- solid red on flavor selection button – indicates tank locked out for low
level
