Sur-Gard SG-System III, Operating Manual

Page: 86 / 131

CHAPTER FIVE - ADVANCED PROGRAMMING
83
SG-System I Operating Manual
5
Bit 3 CESA FormatBit 7 Not used
For example: If the user wants audio to work only for Robofon format, Option B0/1B0/2B0 should be programmed as 11 HEX which
enables bit 0 and bit 4.
SG-DRL3 Option B1: DMP Area BIN or DEC Option

SG-DRL3-2L Option 1B1/2B1: DMP Area BIN or DEC Option
Default (00)
This option is similar to the DMP receiver.
00 = Area is sent to the automation in BINARY

01 = Area is sent to the automation in DECIMAL
The printer outputs remain unchanged.
Examples: Area is sent to the linecard as C0,
BINARY setting
Automation:
P01001 20999 L0480TIMAREA 1
P01001 20999 L0440TIMAREA 2
Printer:
00-01-001-20999--Close USR:04 AREA1 TIMAREA 1
00-01-001-20999--Close USR:04 AREA2 TIMAREA 2

DECIMAL setting
Automation:
P01001 20999 L0401TIMAREA 1
P01001 20999 L0402TIMAREA 2
Printer:
00-01-001-20999--Close USR:04 AREA1 TIMAREA 1
00-01-001-20999--Close USR:04 AREA2 TIMAREA 2
SG-DRL3 Option B2: DTMF Format Disable #1

SG-DRL3-2L Option 1B2/2B2: DTMF Format Disable #1
Default (00)
This option is bit oriented and will disable the decoding of the following DTMF formats.
Bit Description Example Formats
0 15 digits DTMF format Scantronics 6-8-1
1 13 digits DTMF format Scantronics 4-8-1, Ademco Highspeed 4
2 8 digits DTMF format Sur-Gard 4-3 with checksum, 4-3-1 FBI Superfast, Ademco 4-1 express
3 22 digits DTMF format Contact ID 10 digit
4 11 digits DTMF format Acron 3, Ademco Highspeed 2, Scantronics 2-8-1
5 12 digits DTMF format Acron 4, Ademco Highspeed 3, Scantronics 3-8-1
6 23 digits DTMF format Scantronics 6-16-1
7 14 digits DTMF format Scantronics 4-8-1 with checksum, Scantronics 5-8-1