Sur-Gard SG-System III, Operating Manual

Page: 20 / 131

CHAPTER TWO - SG-CPM3 OPERATING MODES
16
SG-System I Operating Manual
2
Contrast Adjust
Press the Up and Enter buttons together to increase the contrast or press Down and Enter together to decrease the contrast. This operation
can be done at any time after the power up sequence.
Active Mode
In Active mode, the primary connection to the computer is via TCP/IP networking on the 10/100 BaseT Ethernet connection for the automa-
tion computer. If this fails, then the output will go via serial RS-232. A command can then be sent through the SG-Systems Console software
to revert back to TCP/IP when the connection is restored. The IP of the SG-CPM3 is displayed on the screen.
Figure 2-1, Active Mode
SG-SYSTEM III v2.00.01.015 (Shelf 1) SG-SYSTEM III v2.00.01.015 (Shelf 1)
SG-SERIAL SG-SERIAL
ACTIVE
12 Linecard(s) (Shelf 1) 12 Linecard(s) (Shelf 1)
05 Linecard(s) (Shelf 2) 05 Linecard(s) (Shelf 2)
Automation IP: 30.0.25.16 Automation IP: 30.0.25.16
Console IP: 30.0.25.26 Console IP: 30.0.25.26
Printer IP: 30.0.25.26 Printer IP: 30.0.25.26
User Define LCD Message Line 1 User Define LCD Message Line 1
User Define LCD Message Line 2 User Define LCD Message Line 2
IP: 30.0.21.112 IP: 30.0.21.112
Nov-29-2010 08:18:04 Nov-29-2010 08:18:04
SYSTEM OK
DG009574
SUR-GARD
Manual Mode
For Manual mode, each event will activate the internal buzzer to be acknowledged manually. Each event will be sent automatically to the
connected printer and displayed on the SG-CPM3 LCD. Messages longer than 80 characters will be displayed on two lines. Once the signal
is acknowledged, it will be cleared from the screen.
Figure 2-2, Manual Mode
Alarm Buffer (0000, 0006) Alarm Buffer (0000, 0006)
MANUAL
01/00-0000-NSC0000-Switching To Manual Mo 01/00-0000-NSC0000-Switching To Manual Mo
de de
02/02/-0000-01-PER TEST REPORT 02/02/-0000-01-PER TEST REPORT
02/01-1234--Nril/R001 02/01-1234--Nril/R001
02/01-0000-02-PER TEST REPORT 02/01-0000-02-PER TEST REPORT
02/02-0000-03-PER TEST REPORT 02/02-0000-03-PER TEST REPORT
02/01-1112-38-BURGLARY 02/01-1112-38-BURGLARY
IP: 30.0.21.112 IP: 30.0.21.112
Nov-17-2011 09:46:04 Nov-17-2011 09:46:04
SYSTEM OK
DG009577
SUR-GARD
NOTE: The SG-CPM3 will display a maximum of 5000 events which have not been acknowledged.