Sur-Gard SG-System III, Operating Manual

Page: 76 / 131

CHAPTER FIVE - ADVANCED PROGRAMMING
73
SG-System I Operating Manual
5
SG-DRL3 Option 93: Min Audio Tone

SG-DRL3-2L Option 193/293: Min Audio Tone
Default (00)
This option is used for 2-way audio tone detection from specific audio panels. This option should be left as default unless otherwise
instructed by Sur-Gard Technical Support.
SG-DRL3 Option 94: Account Digit Stripping

SG-DRL3-2L Option 194/294: Account Digit Stripping
Default (00)
When Option 94/194/294 is set to 00 it is disabled.
When Option 94/194/294 is set to 01, the leading digit of a 4-digit account code will be stripped if it is an F.
Standard 4/2 format Output:
1RRLLLssssssAAAAsXssYZ
Example 1:
Option 94/194/294 set to 01: Panel account code is F245
104091ssssssF245sXssYZ
IF Option 94/194/294 is set to 01 the 'F' will be replaced by a space.
104091sssssss245sXssYZ
This setting will also enable the receiver to decode special pulse extended-extended formats.
104091sssssss245sXssYZ
If Option 94 is set to 02 than the leading digit of any account code greater than four digits will be stripped if it is a zero.
This option will work with the following formats:
Standard Pulse and DTMF(3/x, 4/x & Extended)
FBI
Ademco Super Fast (4/8/1, 4/8)
Contact ID
ITI
SIA
Modem II
SKFSK
Example 1:
Option 94 set to 02
Panel account code is 0345
104091ssssss0345sXssYZ
New Output:
104091sssssss345sXssYZ
Details on "special pulse extended-extended" formats:
Option 94/194/294 = 01, This option applies to pulse formats. If any of the reporting code digits are an A they will be reported on the com-
puter and printer as as an A instead of a 0.
4 digits:
If two rounds match, decode the 4 digit pulse extended format in the form of:
26AC x2 =>KO (last digit must be C)
CCC2 x2 =>KO (1st 3 digits must be C)
26AF x2 =>KO (last digit must be F)
FFF2 x2 =>KO (1st 3 digits must be C)
-------
26AC2F2
Otherwise decode as 3-1 extended or normal 3-1, and if the first digit is F strip it off.
5 digits:
If the checksum is good, decode the 5 digit pulse extended format in the form of: