Sur-Gard SG-System III, Operating Manual

Page: 13 / 131

CHAPTER ONE - INTRODUCTION
9
SG-Sys
tem I Operating Man
ual
1
Figure 1-7, SG-System III Redundancy Wiring Diagram
012
345 867
9A
BDC EF
012
345 867
9A
BDC EF
Shelf 2
Shelf 1
01
2
345
8
6
7
9
A
BD C
E
F
All circuits are power limited
Use only the cables provided in the
SG-System III Interconnect Pack. Failure
to do so may result in damage to the unit.
Using the provided RJ-45 patch cables,
connect the Output of the primary
SG-System III (shelf address 1) to the
Input of the secondary System III (shelf
address 2). Connect the Output of the
secondary SG-System III to the Input of
the primary SG-System III.
Use a small flat screwdriver to
turn the shelf address switch to 2
on the secondary SG-System III.
Switch Setting
Speed
(Printer and Automation)
Shelf
1 57,600 1
2 57,600 2
5 520,000 1
6 520,000 2