Sur-Gard SG-System III, Operating Manual

Page: 73 / 131

CHAPTER FIVE - ADVANCED PROGRAMMING
70
SG-Sys
tem I Operating Man
ual
5
SG-DRL3 Option 80: Kiss-Off to Hang-up Time

SG-DRL3-2L Option 180/280: Kiss-Off to Hang-up Time
Default (1F)
This option determines the delay between Kiss-off and the release of the line. The hex value programmed at this location will be converted
to decimal and then multiplied by 100 ms to generate the delay.
Example:
Option 80 = 0A hex = 10 decimal * 100 ms = 1000 ms = 1 second delay
Option 80 = 1F hex = 10 decimal * 100 ms = 3100 ms = 3.1 second delay
Option 80 = 28 hex = 40 decimal * 100 ms = 4000 ms = 4 second delay
NOTE: This option only applies to the following formats: Pulse, DTMF, SKFSK, Robofon.
SG-DRL3 Options 81 through 88: Handshake Selection

SG-DRL3-2L Options 181/281 through 188/288: Handshake Selection
Defaults:
The channel is a multi-format receiver capable of sending several handshakes to a dialer/panel. Often it is important which handshake is sent
first. Program Options 81/181/281 through 88/188/288 according to your applications.
Note that if AHS is enabled (option 2D/12D/22D), the AHS handshake will be sent before the handshakes programmed in options 81-88.
Handshake Options:
81
82
83
84 23
14
2D
0C 85
86
87
88 0E
0B
00
00
00 No handshake
14 1400 Hz
0B Modem II handshake
0C SIA FSK handshake
0D Westec handshake
0E ITI and Modem IIE handshake
0F DMP handshake
1A Robofon handshake
1B CESA handshake
1C Outel handshake
1D Single Dual Tone handshake 1400 Hz/100ms 100ms pause and 2300 Hz/100ms tone with a kiss off of
1400 Hz
1E Scantronics Dual Tone
1F Vonk (no handshake)
23 2300Hz