Sur-Gard SG-System III, Operating Manual

Page: 30 / 131

CHAPTER FOUR - PROGRAMMING/OPERATION
27
SG-Sys
tem I Operating Man
ual
4
• The COMx properties windows are displayed. The configuration should be:
Figure 4-2
Set the DRL3E/DRL3-2L debug flags:
1.
Click on the 'OK' button after setting the configuration.
2. The HyperTerminal window is displayed. Press any key. The debug menu is displayed.
3. Press D to display the debug flags.
4. Enter “06” for channel 1 or “07” for channel 2 and press enter. Channel 2 is on available on DRL3-2L line cards.
5. Enter “03” and press enter.
If debug output is needed from 2 channels, repeat steps 3-5 for the other channel.
Manual Programming
The user interface consists of three buttons: the Scroll Up button, the Scroll Down button, and the Enter button. These buttons are used to
access the programming of the SG-CPM3, and to view alarm and trouble messages in manual mode. They are located on the right side of the
screen.
SG-DRL3 - bits per second 19200
SG-DRL3E/SG-DRL3-2L - bits per second 57600
SG-DRL3-IP - bits per second 19200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None