Sur-Gard SG-System III, Operating Manual

Page: 71 / 131

CHAPTER FIVE - ADVANCED PROGRAMMING
68
SG-Sys
tem I Operating Man
ual
5
4/2 format with account code 1234, alarm code 2 on zone 3. (1234-23)
NOTE: The first digit of the Contact ID event code will also follow option 7C/17C/27C.
For UL Listed products, the permitted setting is 00.
SG-DRL3 Option 7D: Audio Zone Code

SG-DRL3-2L Option 17D/27D: Audio Zone Code
Default (00)
Audio zone code is the range of zone codes that will activate audio. The first digit is the lowest code. The second digit indicates the highest
zone that will activate audio. Option 7D/17D/27D may be used with 10 to 40 Baud formats, DTMF 4/1, 4/2, and 4/3 formats.
NOTE: Option 7D/17D/27D Only works for DMP Serial 1 not for DMP Serial 3.
For UL Listed products, the permitted setting is 00.
SG-DRL3 Option 7E Audio RS-232

SG-DRL3-2L Option 17E/27E Audio RS-232
Default (00)
This is the code sent to the automation software that indicates that 2-way audio has been initiated. If this option is set to '00' there will be no
audio-initiated message sent to the automation output.
Option
7A
17A
27A Option
7C
17C
27C Switch Reason (or 7B/17B/27B) to Audio
00

1-1
2-3
00
1-2

3-5

1-4
1-2
00
00
3-4
3-4

1-3

1-5
Yes

Yes
No
No
No

No

Yes
Alarm code 2 falls within the code range 1-2.
Account code 1234 falls within the range 1-1.
Account code 1234 is outside the range 2-3.
Alarm code 2 is outside the range 3-4.
If both are programmed, both must be good and alarm code 2 is outside the
range 3-4.
Both must be good and account code 1234 is outside the range 3-5.
Alarm code 2 falls within the code range 1-5, account code 1234 falls within
the range 1-4.
Setting Description Automation Output
00 2-way audio message disabled No Automation Output
01 Outputs automation message with protocol "S Send SRRLLL[#AAAA|NLFssoo][DC4]
02 Outputs automation message with protocol "O Send 0RRLLL[#AAAA|NLFssoo][DC4]
05 Outputs automation message with protocol "S"
and adds RRLL to the message as clear text Send SRRLLL[#AAAA|NLFssoo*RRLL*][DC4]
06 Outputs automation message with protocol "O"
and adds RRLL to the message as clear text Send 0RRLLL[#AAAA|NLFssoo*RRLL*][DC4]
09 Outputs automation message with protocol "S"
and adds the dialed phone number for the call
transfer SRRLLL[#AAAA|NLFssoo*#NNNNNNNNNNNNNNNN*][DC4]