![Sur-Gard SG-System III Operating Manual Download Page 77](http://html1.mh-extra.com/html/sur-gard/sg-system-iii/sg-system-iii_operating-manual_1406547077.webp)
CHAPTER FIVE - ADVANCED PROGRAMMING
74
SG-Sys
tem I Operating Man
ual
5
26ACF =>KO (2nd last digit must be C)
CCC27 =>KO (1st 3 digits must be C)
26AFC =>KO (2nd last digit must be F)
FFF2D =>KO (1st 3 digits must be C)
-------
26AC2F2
Otherwise decode as 3-1 extended or normal 3-1, and if the first digit is F strip it off.
Do normal decoding based on options (4-1, 4-1 extended, 3-1checksum, 3-2) and if the first digit is F strip it off.
6 digits:
If two rounds match, decode the 6 digit pulse extended format in the form of:
F1231F
F1231F =>KO (last two digits must be 1F to 8F)
F12301
F12301 =>KO (last two digits must be 01 to 06)
F123B2
F123B2 =>KO (last two digits must be B0 to BF)
-------
1231F01B2
Otherwise decode as 4-2.
SG-DRL3 Option 95: 5 and 6 Digit Pulse
SG-DRL3-2L Option 195/295: 5 and 6 Digit Pulse
Default (00)
The Line card cannot distinguish between various 5-digit formats and 6-digit formats. 4/1, 3/2 and 3/1 with checksum cannot be distin-
guished because all of them contain a total of 5 digits. 4/2 and 5/1 cannot be distinguished because all of them contain a total of 6 digits.
*NOTE: The printer messages for the 3/2 format are the same as those used for the 4/2 format.
**NOTE: This selects 3/1 checksum only for 40 baud panels, responding on the 2300Hz handshake. For all
other panels, this will be decoded as 4-1.
***NOTE: The printer messages for the 5/1 format are the same as those used for the 4/1 format.
Automation outputs
1RRLLLssssssAAAAsEsssZ[DC4] (4/1)
1RRLLLsssssssAAAsEssYZ[DC4] (3/2)
1RRLLLsssssssAAAsEsssZ[DC4] (3/1)
1RRLLLsssssAAAAAsEsssZ[DC4] (5/1)
Printer outputs
RR-LLL-AAAA-Z-Message (4/1)
Value
00
01
02
03
10
11
12
13
5 Digit Setting
select 4/1 format
select 3/2 format*
select 3/1 checksum format
select 3/1 checksum format special**
select 4/1 format
select 3/2 format*
select 3/1 checksum format
select 3/1 checksum format special**
6 Digit Setting
select 4/2 format
select 4/2 format
select 4/2 format
select 4/2 format
select 5/1 format***
select 5/1 format***
select 5/1 format***
select 5/1 format***
Summary of Contents for SG-System III
