Chapter 1 Installation
www.supmea.com
- 2 -
86
m
m
3.
39
ln
ch
1.1. Inspection prior to transmitter Installation
You will find a "Position Drawing" in the packing. Please use it as a template in the
place that you are going to install the flowmeter. Then drill 4 installing holes at the
screws position shown on the drawing with the 5.0mm drill.
Take out the enclosed screws and plastic bushings. Insert the plastic bushings
into the installing holes. Put the flowmeter to the position and screw it in.
135 mm
5.32lnch
Position drawing
1.
Place this template on the wall and
drill 4 holes of 5mm diameter &
40mm deep.
2.
Insert a plastic bushing into each of
the 4 holes.
3.
Screw 4 pcs PA 4
×
30mm self
tapping screws through the
transmitter enclosure base and
attach it to thewall.
4.
Tighten the screws to secure to
the enclosure on the wall.
135mm
5.32lnch
MODEL: D116G
Digital Correlation Transit -Time
flowmeter
