Chapter 1 Installation
www.supmea.com
- 8 -
For example, if the pipe material is "Stainless Steel", Press
to enter
Window M14, press
to modify the options. Select the "1. Stainless Steel"
option by pressing
and
, then press
to confirm the selection; It is
possible to press
key to change the selection and wait until"1.Stainless
Steel" is displayed on the second line of the screen, then press
to confirm.
1.6. flowmeter window description
These windows are assigned as follows:
01~08
Flow Totalizer Display: to display flow rate, positive total, negative total,
net total, velocity, date & time, present operation and flow results today,
etc.
10~29 Initial Parameter Setup: to enter pipe outside diameter, pipe wall
thickness, fluid type, transducer type, transducer mounting method and
spacing, etc.
30~38 Flow Units Options: to select the flow unit such as cubic meter, liter or
other units, can turn totalizers on/off and reset totalizers, etc.
40~49 Setup options: Scaling factor, system lock (Window M47), etc.
55~89 Input and output setup: date and time, ESN, communication baud rate
setting, etc.
90~98 Diagnoses: Signal strength and signal quality (Window M90),
TOM/TOS*100 (Window M91), flow sound velocity (Window M92), total
time and delta time (Window M93), Reynolds number and factor (Window
M94), etc.
+0~+5 Appendix: power on/off time, total working hours, on/off times and a
single-accuracy function calculator.
Attention
Generally, press
key first if operator wants to enter “modify” status. If the “modify” is still not
possible even after pressing the
key, it means that system is locked by a password. To
“Unlock” it, select “Unlock” in Window M47 and enter the original password.
