Chapter 1 Installation
www.supmea.com
- 3 -
1.2. Wire Connecting
1.2.1. Power supply option
Customers should pay special attention to specify the desired power supply when
wiring. Factory standard power supply is 10~36VDC/1A max.
1.2.2.To ensure the transmitter can work normally, please pay attention
to the followings when wiring: Ensure that power connections are made in
accordance with the specifications shown on the transmitter.
1.2.3. Transmitter wiring
Once the electronics enclosure has been installed, the flowmeter wiring can be
connected. Open the case, you will find the transmitter interfaces labels from left
to right as follows:
Power supply, Relay output, OCT Output, Upstream transducer, Downstream
transducer, 4-20mA, RS485 interface.
Refer to the below diagram for specific connection:
Attention
When installing please ensure the front cover is secure and will not fall open.
