Chapter 6 Manual Zero Point Windows display codes
www.supmea.com
- 30 -
Transducer Mounting
Four mounting methods are available:
0. V
1. Z
2. N
Transducer Spacing
The operator must mount the
transducer according to the
transducer spacing displayed (be sure
that the transducer spacing must be
measured
precisely during installation). The
system will display the data
automatically after the pipe parameter
had been entered.
Initial Parameter Setups and Save
Load and save the parameters.
18 different sets of setup conditions/
groups are available to load and save
by three methods
0. Entry to Save
1. Entry to Load
2. To Browse
Select "Entry to Save", press
.
An ID code and the original
parameters are displayed in the
window. Press UP or DOWN ARROW
Parameter
Setups
Entry
to
SAVE
Transducer
Mounting 0.V
Tranducer
Spaci ng
148.66
mm
