Chapter 1 Installation
www.supmea.com
- 7 -
outside diameter, just press the
keys for window ID code 11.
Another method to visit a particular window is to press
and
keys to
scroll the screen. For example, if the current window ID code is M02, press
key to enter Window M01, press the
button again to enter Window M00; then,
press the
key to back Window M01, and press the ˅ key again to enter
Window M02.
Windows are separated into three types: (1) Data Type, such as M11, M12; (2)
Option Type, such as M14; (3) Pure Display Type, such as M01, M00.
You can check the corresponding parameters by visiting the Data Type Windows.
If you want to modify the parameters, input the digits and press
or press
first, input the digits then press Enter again to confirm.
Example1: To enter a pipe outside diameter of 219.234, the procedure is as
follows:
Press
keys to enter Window M11 (the numerical value displayed
currently is a previous value). Now press
key. The symbol ">" and the
flashing cursor are displayed at the left end of the second line on the Screen. Then
input the parameters; or do not press the
key, directly enter
.
You can check the selected option by visiting Option Type Windows. If you want to
modify it, you must press
first, the symbol ">" and the flashing cursor are
displayed at the left of the Screen. Operator can use the
and
to scroll
the screen and get the required value then press
to confirm; or enter the
corresponding value option directly and press
to confirm.
