Chapter 1 Installation
www.supmea.com
- 5 -
Wire Guage: AWG 20#
Core Line Color: Red and Black
Shield Floor: 128 Intwine
1.3. Powering on
As soon as the flowmeter is switched on, the self-diagnosis program will start to
run. If any error is detected, an error code will display on the screen (Refer - Error
Diagnoses). After that self-diagnosis, the system will run automatically according
to the last input parameters.
If the installation is accomplished when system is switched on, gain adjustment
can be monitored in Window M01. After S1, S2, S3, S4 are displayed on the upper
left corner of the screen, the system will activate the normal measurement
condition automatically. It is indicated by code "*R" on the upper left corner of the
screen.
If it is the first time to use or install on a new site, the customer need to input the
new installation site parameters. The system will default to the last window
settings and automatically display them at next power on.
1.4. Keypad functions
This keypad is dual function keypad:
1.When separately pressed, is shortcut function, referring to "2. Quickly set menu
instructions ";
2.Press
and Number key, is Menu key, referring to"6.Menu Window
Description".
Follow these guidelines when using the flowmeter keypad (Refer to Keypad
Figure):
~
And
To input numbers.
Warning
Wire with power off. The flow meter must be reliable grounding before installation.
