Supero SUPERSERVER 5015B-T, User Manual

Page: 23 / 102

Chapter 2: Server Installation
2-9
Figure 2-5.
Accessing the Inside of the System
2-6 Checking the Drive Bay Setup
Next, you should check to make sure the peripheral drives and the Serial ATA drives
and Serial ATA backplane have been properly installed and all essential connec-
tions have been made.
Checking the Drives
All drives can be accessed from the front of the server. For servicing the
CD-ROM and fl oppy drives, you will need to remove the top chassis cover.
The Serial ATA disk drives can be installed and removed from the front of the
chassis without removing the top chassis cover.
Refer to Chapter 6 if you need to reinstall a CD-ROM and/or fl oppy disk drive
to the system.
Depending upon your system's confi guration, your system may have one or
two Serial ATA drives already installed. If you need to install Serial ATA drives,
please refer to the appropriate section in Chapter 6.
1.
2.
3.