Supero SUPERSERVER 5015B-T, User Manual

Page: 12 / 102

1-4
S
UPER
S
ERVER 5015B-T User's Manual
1-3 Server Chassis Features
The SuperServer 5015B-T is built on the SC811TQ-260 1U rackmount server chas-
sis. The following is a general outline of the main features of the SC811TQ-260
chassis.
System Power
When confi gured as a SuperServer 5015B-T, the SC811TQ-260 chassis includes
a single 260W power supply.
Serial ATA Subsystem
For the 5015B-T, the SC811TQ-260 chassis was designed to support two Serial
ATA hard drives. The Serial ATA drives are hot-swappable units. ATA/100 IDE drives
can be alternately supported.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
Control Panel
The control panel on the SC811TQ-260 provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk drive activ-
ity and system overheat conditions. The control panel also includes a main power
button and a system reset button.
Rear I/O Panel
The SC811TQ-260 is a 1U rackmount chassis. Its I/O panel provides one mother-
board expansion slot, one COM port, two USB ports, PS/2 mouse and keyboard
ports, a VGA (graphics) port and two Gb Ethernet ports.
Cooling System
The SC811TQ-260 chassis has an innovative cooling design that features four
4-cm system cooling fans. The fans plug into fan headers on the motherboard. A
fan speed control setting in BIOS allows fan speed to be determined by system
temperature [the recommended setting is 3-pin (Server)].