Supero SUPERSERVER 5015B-T, User Manual

Page: 60 / 102

6-6
S
UPER
S
ERVER 5015B-T User's Manual
Figure 6-4. Removing/Installing Serial ATA Drives
!
Important: Regardless of how many Serial ATA drives are
installed, both drive carriers must remain in the drive bays to
maintain proper airfl ow.
Serial ATA Power Cables
Serial ATA power cables should be routed so that they do not block the airfl ow
through the chassis. See the motherboard layout diagram for the location of the
cable connections.
Serial ATA Backplane
The Serial ATA drives plug into a backplane that provides power, drive ID and bus
termination. A RAID controller can be used with the backplane to provide data secu-
rity. The operating system you use must have RAID support to enable the hot-swap
capability of the Serial ATA drives. The backplane has two jumpers as follows:
JP18: Alarm reset
JP25: Hard drive temperature threshold
Settings: Open = 45º, Pins 1-2 = 50º, Pins 2-3 = 55º.