Supero SUPERSERVER 5015B-T, User Manual

Page: 68 / 102

7-6
S
UPER
S
ERVER 5015B-T User's Manual
Transfer Mode
This option allows the user to set the transfer mode. The options are Standard , Fast
PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/DMA1 and FPIO4/DMA2.
Ultra DMA Mode
This option allows the user to confi gure the Ultra DMA Mode setting. The options
are Disabled , Mode 0, Mode 1, Mode 2, Mode 3, Mode 4, and Mode 5.
Extended Primary Master/Slave
These settings allow the user to set the parameters of Extended Primary Master/
Slave connections. Hit <Enter> to activate the following sub-menu screen for
detailed options of these items. Set the correct confi gurations accordingly. The
items included in the sub-menu are:
Type
This option allows the user to select the type of an IDE device. Select Auto
to allow the BIOS to automatically confi gure the parameters of the IDE device
installed on a slot. Enter a number between 1 to 39 to select a predetermined
IDE device. Select User to allow the user to enter the parameters of the HDD
installed. Select CDROM if a CDROM drive is installed. Select ATAPI if a
removable disk drive is installed.
LBA Format
The following items will be displayed by the BIOS:
Total Sectors: This item displays the number of total sectors available in the
LBA Format.
Maximum Capacity: This item displays the maximum capacity in the LBA
Format.
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be
used in multi-sector transfer. The options are Disabled , 4 Sectors, 8 Sectors,
and 16 Sectors.
LBA Mode Control
This item determines whether the Phoenix BIOS will access a IDE Device via
the LBA mode. The options are Enabled and Disabled.
32 Bit I/O
This option allows the user to enable or disable the function of 32-bit data
transfer. The options are Enabled and Disabled .