Supero SUPER S2DM3, User Manual

Page: 17 / 94

Chapter 1: Introduction
1-9
Introduction
Jumpers Description Default Setting
JBT1 CMOS Clear (p. 2-14) Pin 1-2 (Normal)
JP3 Front Side Bus Speed (p. 2-15) Pin 1-2 (CPU Select)
JP5 Host Bus ECC (p. 2-16) Closed (Enabled)
JP7 AC97 Audio (p. 2-15) Pin 1-2 (Enabled)
JP10 Overheat Alarm (p. 2-15) Closed (Enabled)
JP11 Onboard LAN/NIC (p. 2-16) Closed (Enabled)
JP13 P/S Failure Alarm (p. 2-16) Open (Disabled)
Connectors Description
AGP PRO AGP Pro Slot (p. 2-18)
CHASSIS FAN1 Primary Chassis Fan Header (p. 2-11)
CHASSIS FAN2 Secondary Chassis Fan Header (p. 2-11)
COM1/COM2 COM1/COM2 Serial Port Connector (p. 2-11)
CPU1/2FAN CPU 1/2 Fan Header (p. 2-11)
GAME Game Port
IR Header Infrared Device Header (p. 2-11)
Bank0-Bank3 Memory (RAM) Slots (p. 2-5)
J12 Universal Serial Bus Ports (p. 2-12)
J13 PS/2 Keyboard/Mouse (p. 2-12)
J14, J15 IDE Hard Disk Drive Connectors (p. 2-18)
J16 Floppy Disk Drive Connector (p. 2-17)
J22 Parallel Printer Port (p. 2-17)
J27 Primary ATX Power Connector (p. 2-8)
J34/J44 Audio CD Input (sm/lrg connector) (p. 2-12)
J38 Ethernet Port
J48 Primary ATX Power Connector (p. 2-8)
JF1 Front Control Panel (p. 2-7)
JL1 Chassis Intrusion Header (p. 2-13)
JP12 Power Supply Fail Header (p. 2-13)
LINE IN Audio In Connector
LINE OUT Audio Out (Speaker) Connector
MIC Microphone Input
PWR_SEC Secondary ATX Power Connector (p. 2-8)
THRM FAN Thermal Control Fan Header (p. 2-11)
WOL Wake-on-LAN Header (p. 2-12)
WOR Wake-on-Ring Header (p. 2-13)
Jumpers not mentioned are for test purposes only.