Supero SUPER P3TSSA, User Manual

Page: 83 / 105

S
UPER P3TSSA/P3TSSR/P3TSSE User’s Manual
4-30
After G3 Enable
This option allows AfterG3 Enable support. The settings are "Disabled"
and "Enabled." Disabled prevents the system to power on after power is
applied to the system. Enabled allows the system to power on after power
is applied to the system. This means that if an ATX compliant power supply
is turned hard off or unplugged from the wall (power socket supplying it
power), the computer system will not power back on immediately after the
power cord is reattached or the hard off switch is flipped back on. The
power button on the front of the chassis is usually the soft off, meaning
that there is still power being supplied to the motherboard even though the
system looks completely off. Hard off means that there is not power being
supplied to the system at all. The only power is coming from the backup
battery on the motherboard.
Suspend Power Saving Type
The settings for this option are "C2" and "S1." The C2 setting allows the
CPU (microprocessor) to be put in a low power state. In this state, incom-
ing interrupts wake-up the CPU (microprocessor) to process them (I/O
APIC). S1 allows the system to enter the S1 POS (Power On Suspend)
state. While the system is in this state, the CPU is not executing instruc-
tions, all power resources that supply system level reference of S0 are off,
system memory context is maintained, devices that reference power re-
sources that are on are on, and devices that can wake-up the system can
cause the CPU to continue to execute from where it left off.
Suspend Time Out
This option specifies the length of system inactivity while in the standby
state that should expire before the computer enters a suspend power state.
The settings are "Disabled", "1Min", "5Min" and "10Min."
Power Button Mode
This option specifies how the external power button on the computer chas-
sis functions. When set to "On/Off", depressing the power button turns
the computer on or off. When set to "Suspend", depressing the power
button places the computer in Suspend mode or Full On power mode. The
"Standby" setting places the computer in Standby or Full On mode.