Supero SUPER P3TSSA, User Manual

Page: 38 / 105

2-10
S
UPER P3TSSA/P3TSSR/P3TSSE User’s Manual
CD Headers (P3TSSA only)
There are two CD headers of dif-
ferent sizes on the motherboard
for audio CD playback. You must
connect an audio cable from your
CD player to the header that fits
your cable's connector. Refer to
Table 2-12 for pin definitions.
Table 2-12
Audio CD Header Pin Definitions
(CD)
Pin
N u m b e r
1
2
3
4
Definition
Left Stereo Signal
G r o u n d
G r o u n d
Right Stereo Signal
Pin
N u m b e r
1
2
3
Definition
+ 5 V S t a n d b y
G r o u n d
W a k e - u p
Table 2-11
Wake-On-LAN Pin
Definitions (WOL)
Wake-On-LAN
The Wake-On-LAN header is des-
ignated WOL on the motherboard.
Refer to Table 2-11 for pin defini-
tions. You must enable the LAN
Wake-Up setting in BIOS to use
this function. (You must also have
a LAN card with a Wake-on-LAN
connector and cable.)
Serial Ports
Two connectors, for the COM1
and COM2 serial ports, are pro-
vided on your board. COM1 is lo-
cated beside the VGA port (see
Figure 2-3) and COM2 is a header
located near the backplane ports.
See Table 2-10 for pin definitions.
A 10-pin serial ribbon cable is re-
quired if connecting a device to
the COM2 header.
P in N u m b e r D e fin itio n
1 D C D
2 S e ria l In
3 S e ria l O u t
4 D T R
5 G ro u n d
P in N u m b e r D e fin itio n
6 D S R
7 R T S
8 C T S
9 R I
1 0 N C *
T a b le 2 -1 0
S e ria l P o rt P in D e fin itio n s (C O M 1 /C O M 2 )
Audio CD Header Pin Definitions
(CD_1)
Pin
N u m b e r
1
2
3
4
Definition
Right Stereo Signal
G r o u n d
Left Stereo Signal
G r o u n d
*NC indicates "no connection".