Supero SUPER P3TSSA, User Manual

Page: 101 / 105

S
UPER P3TSSA/P3TSSR/P3TSSE User’s Manual
B-6
Checkpoint Code Description
57h The A20 address line, parity, and the NMI are disabled. Adjusting
the memory size depending on relocation and shadowing next.
58h The memory size was adjusted for relocation and shadowing.
Clearing the Hit <DEL> message next.
59h The Hit <DEL> message is cleared. The <WAIT...> message is
displayed. Starting the DMA and interrupt controller test next.
60h The DMA page register test passed. Performing the DMA
Controller 1 base register test next.
62h The DMA controller 1 base register test passed. Performing the
DMA controller 2 base register test next.
65h The DMA controller 2 base register test passed. Programming
DMA controllers 1 and 2 next.
66h Completed programming DMA controllers 1 and 2. Initializing the
8259 interrupt controller next.
67h Completed 8259 interrupt controller initialization.
7Fh Extended NMI source enabling is in progress.
80h The keyboard test has started. Clearing the output buffer and
checking for stuck keys. Issuing the keyboard reset command
next.
81h A keyboard reset error or stuck key was found. Issuing the
keyboard controller interface test command next.
82h The keyboard controller interface test completed. Writing the
command byte and initializing the circular buffer next.
83h The command byte was written and global data initialization has
completed. Checking for a locked key next.
84h Locked key checking is over. Checking for a memory size
mismatch with CMOS RAM data next.
85h The memory size check is done. Displaying a soft error and
checking for a password or bypassing WINBIOS Setup next.
86h The password was checked. Performing any required program-
ming before WINBIOS Setup next.
87h The programming before WINBIOS Setup has completed.
Uncompressing the WINBIOS Setup code and executing the
AMIBIOS Setup or WINBIOS Setup utility next.
88h Returned from WINBIOS Setup and cleared the screen. Perform
ing any necessary programming after WINBIOS Setup next.