Supero SUPER P3TSSA, User Manual

Page: 65 / 105

S
UPER P3TSSA/P3TSSR/P3TSSE User’s Manual
4-12
BootUp Num Lock
This option is used to select the status of the Number Lock function on your
keyboard on bootup. The settings are "On" and "Off."
BootUp CPU Speed
This option is used set the CPU speed to either "High" or "Low."
PS/2 Mouse Support
This option specifies whether a PS/2 Mouse will be supported. Settings are
"Enabled" and "Disabled."
Typematic Rate
Set this option to select the rate at which the computer repeats a key that
is held down. Settings are "Fast" and "Slow." Fast: This sets the rate the
computer repeats a key to over 20 times per second. Under normal opera-
tions, this setting should not be changed. Slow: This sets the rate the
computer repeats a key to under 8 times per second.
Boot Settings Configuration
Quick Boot
This option allows the BIOS to skip certain tests that are normally perfomred
on boot up. You can disable the option to speed up boot time. The settings
are "Disabled" and "Enabled."
Quiet Boot
If "Disabled", this option will cause the normal POST messages to be dis-
played upon setup. When "Enabled", the OEM logo is displayed instead of
the POST messages.
Add-On ROM Display Mode
Set this option to display add-on ROM (read-only memory) messages. The
settings for this option are "Force BIOS" and "Keep Current." Force BIOS
allows the computer to force a third party BIOS to display during system
boot. Keep Current has the system display AMIBIOS information on bootup.