Supero SUPER P3TSSA, User Manual

Page: 66 / 105

Chapter 4: BIOS
4-13
System Keyboard
This option is to let the system know if a keyboard is "Present' or "Ab-
sent."
Primary Display
This option specifies the type of monitor display you have installed on the
system. The settings are "Absent", "VGA/EGA", "Color 40 x 25", "Color 80
x 25" and "monochrome."
Parity Check
Use this option to either "Enable" or "Disable" the use of memory parity
checking.
Boot to OS/2
This option can be used to boot the system to an OS/2 operating system.
The settings are "No" and "Yes."
Wait for F1 if Error
This settings for this option are "Enabled" and "Disabled." Disabled: This
prevents the AMIBIOS to wait on an error for user intervention. This setting
should be used if there is a known reason for a BIOS error to appear. An
example would be a system administrator must remote boot the system.
The computer system does not have a keyboard currently attached. If this
setting is set, the system will continue to bootup in to the operating system.
If ‘F1’ is enabled, the system will wait until the BIOS setup is entered.
Enabled: This option allows the system BIOS to wait for any error. If an
error is detected, pressing <F1> will enter Setup and the BIOS setting can
be adjusted to fix the problem. This normally happens when upgrading the
hardware and not setting the BIOS to recognize it.
Hit "Delete" Message Displayed
This option tells the system to display or not display the "Hit Delete to Enter
Setup" message. The settings are "Enabled" and "Disabled."