Supero SUPER 370SSA, User Manual

Page: 37 / 92

Chapter 2: Installation
2-9
Installation
Pin
N u m b e r
1
2
3
Definition
+ 5 V S t a n d b y
G r o u n d
W a k e - u p
Table 2-11
Wake-On-LAN Pin
Definitions (WOL)
Wake-On-LAN
The Wake-On-LAN header is lo-
cated on WOL. Refer to Table 2-
11 for pin definitions. You must
enable the LAN Wake-Up setting in
BIOS to use this function. (You
must also have a LAN card with a
Wake-on-LAN connector and cable
to use this feature.)
Universal Serial Bus (USB)
Two Universal Serial Bus connec-
tors (USB0 and USB1) are located
on J32 and J33. See Table 2-9 for
pin definitions. The 370SSA also
p r o v i d e s s u p p o r t f o r t w o a d d i -
tional USB ports: USB2 is a header
located near the IDE connectors
and provides easy front side chas-
sis access (cable not included).
USB3 is incorporated into the CNR
slot - the CNR card you plug in
here should have a USB port.
Table 2-9
Universal Serial Bus Pin Definitions
Pin
N u m b e r
Definition
1 + 5 V
2 P 0 -
3 P 0 +
4 G r o u n d
5 N / A
Pin
N u m b e r
Definition
1 + 5 V
2 P 0 -
3 P 0 +
4 G r o u n d
5 K e y
J32 J33
Serial Ports
Two connectors, for the COM1
and COM2 serial ports, are
provided on your board. COM1 is
located below the parallel port
(see Figure 2-3) and COM2 is
located just behind the Game
Port. See Table 2-10 for pin
definitions. A 10-pin serial ribbon
cable is required if connecting a
device to a COM header.
Table 2-10
Serial Port Pin Definitions
(COM1, COM2)
Pin Number Definition
1 D C D
2 D S R
3 Serial In
4 R T S
5 Serial Out
Pin Number Definition
6 C T S
7 D T R
8 RI
9 G r o u n d
10 N C