Chapter 3: RAID Confi guration
3-39
To Verify the Status of a Device
2. Right-click on a device that you wish to verify the status to activate the pop-up
menu as shown in the second picture on Page 3-36.
3. From the pop-up menu, select Verify and hit <Enter>.
4. A warning message will appear. Click OK if you want to continue with the
verifying process. Click cancel to cancel the procedure.
(Note: It is a lengthy process to verify the status of a device.)
To Verify/Fix an Array
2. Right-click on a device that you wish to verify and rebuild the array to activate
the pop-up menu as shown in the second picture on Page 3-36.
3. From the pop-up menu, select Verify/Fix and hit <Enter>. This function will
verify the device selected and attempt to rebuild the array if it is damaged.
4. A warning message will appear. Click OK if you want to continue with the
procedure. (Note: It is a lengthy process to verify/fi x the status of a device.)