Chapter 3: RAID Confi guration
3-33
6. After fi nishing with the Registration Screen, hit <Enter> to enter the Adaptec
Storage Manager Utility as shown below.
7. Double-click on the ASM Controller Icon (above) to display the ASM status
screen as shown below.
*Notes: 1. If the AMI MG-9072 Firmware is used, two enclosures with eight
HDDs will be displayed. If the AMI MG-9071 is used, only one enclosure with
4 HDDs will be available. 2. If the triangle icon appears, the Enclosure
Management Devices are properly installed. If the triangle icon does not dis-
play, please check: a. If you have an add-on card that supports SES-2, b. If
the Side Band of the add-on card is properly installed (eg: pin 1 to pin 1), c. If
your ASM version is compatible with your Storage Driver Version.)
