AOC-LPZCR2 User's Guide
2-6
2.5 Installing the Controller Driver
2.5.1 Creating the Driver Floppy Disk:
A CD-ROM that contains the drivers for the Windows OS, the Linux Red Hat/SuSE
OS, and the Controller BIOS is included in the shipping package. Please locate
the CD-ROM before installing the driver. (*Note: this CD-ROM does not perform
Auto-boot or auto-play.)
For the Windows 32-bit Operating System:
• Copy all fi les from the folder: \Drive\Windows into a blank, formatted fl oppy disk.
(The folder is saved in the CDROM that came with your shipment.)
For the Red Hat/SuSE Operating System:
• Make the fl oppy disk by using the diskette image fi le at \Drive\Linux, which is
stored in the CD-ROM.
2.5.2 Adding the Driver into an Existing System
(*Note: An existing system is a system that has an operating system already
installed and the AOC-LPZCR2 driver is being installed as a Secondary
Controller.)
For the Windows Operating System
a. Install the controller and make sure that its BIOS appears in POST.
b. Start the Windows OS. The Windows OS will launch the "Found New Hardware
Wizard" and search for the installer driver.
c. Insert the driver fl oppy disk that you've created into the computer, select the
fl oppy drive as the source, and press the <Enter> key.
d. Continue clicking <Next> until the driver is successfully installed.
e. Remove the driver disk from the FDD drive and restart the system to complete
the installation process.
For the Red Hat/SuSE Operating System
a. Start the Red Hat/SuSE OS.
b. Insert and mount the RPM driver Floppy or CD.
c. Type: "rpm -Uvh fi lename.rpm" at the prompt, and then, follow the instructions
given on the screen to install the driver. (*Note: fi lename=the fi le name of the
RPM driver that appears on your screen.)
d. Run fdisk, mkfs, and create a mount point for the new driver.