Chapter 3: RAID Confi guration
3-23
3.2.3 Using Adaptec's SerialSelect Utility
(*Please refer to Page 3-1 for SAS Jumper Confi guration before using the
SerialSelect Utility. Please refer to Section 3.2.1 for SCSI and Section 3.2.3
for SAS Utility Confi guration settings.)
To Use the SerialSelect Utility
1. Turn on your computer. When prompted, press <Ctrl> and <A>
to access the
Adaptec RAID Confi guration Utility.
2. From the RAID Confi guration Main Menu, select "SerialSelect Utility" (as
shown below,) and press <Enter>.
