5-18
S
UPER
S
ERVER 5025M-4+/5025M-i+ User's Manual
JLAN1/2 Enable/Disable
Change the setting of jumper JPL1 or
JPL2 to enable or disable the JLAN1
or JLAN2 ports, respectively. See the
table on the right for jumper settings.
The default setting is enabled.
Watch Dog Enable/Disable
JWD enables the Watch Dog function,
a system monitor that takes action
when a software application freezes
the system. Jumping pins 1-2 will
have WD reboot the system if a pro-
gram freezes. Jumping pins 2-3 will
generate a non-maskable interrupt for
the program that has frozen. See the
table on the right for jumper settings.
Watch Dog must also be enabled in
BIOS.
Note: when Watch Dog is enabled, the user must
write their own application software to disable the
Watch Dog Timer.
JLAN1/2 Enable/Disable
Jumper Settings (JPL1/JPL2)
Jumper Setting Defi nition
Pins 1-2
Enabled
Pins 2-3
Disabled
Watch Dog
Jumper Settings (JWD)
Jumper Setting Defi nition
Pins 1-2
Reset
Pins 2-3
NMI
Open
Disabled
SMBus to PCI
Jumpers JP5 and JP6 allow you to
connect PCI/PCI-X slots to the Sys-
tem Management Bus. The default
setting is “Open” to disable the con-
nection. See the table on the right for
jumper settings.
SMBus to PCI
Enable/Disable
Jumper Settings (JP5/JP6)
Jumper Setting Defi nition
Closed
Enabled
Open
Disabled
Summary of Contents for 5025M-4 Plus
