Supero 5025M-4 Plus, User Manual

Page: 3 / 146

Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 5025M-
4+/5025M-i+. Installation and maintainance should be performed by experienced
technicians only.
The SuperServer 5025M-4+/5025M-i+ is a high-end, dual Pentium processor
rackmount server based on the SC823S-550LP/SC823i-550LP 2U rackmount
server chassis and the PDSM4+/PDSME+ motherboard, which supports single
Intel PentiumD, Pentium4 or CeleronD type processors. Refer to the motherboard
specifi cations pages on our web site for updates on supported processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the serv-
er system and describes the main features of the PDSM4+/PDSME+ motherboard
and the SC823S-550LP/SC823i-550LP chassis, which make up the SuperServer
5025M-4+/5025M-i+.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 5025M-
4+/5025M-i+ into a rack and check out the server confi guration prior to powering
up the system. If your server was ordered without processor and memory com-
ponents, this chapter will refer you to the appropriate sections of the manual for
their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
iii
Preface