Supero 5025M-4 Plus, User Manual

Page: 12 / 146

S
UPER
S
ERVER 5025M-4/5024M-i Manual
1-2
One (1) CD containing drivers and utilities
SuperServer 5025M-4+/5025M-i+ User's Manual
1-2 Motherboard Features
At the heart of the SuperServer 5025M-4+/5025M-i+ lies the PDSM4+/PDSME+, a
single Intel Pentium processor motherboard based on the Intel® 3010 chipset and
designed to provide maximum performance. Below are the main features of the
PDSM4+/PDSME+. (See Figure 1-1 for a block diagram of the chipset.)
Processors
The PDSM4+/PDSME+ supports single a Intel E6000 & E4000 sequence, Penti-
umD (Dual-Core), Pentium4 Extreme Edition, Pentium 4, Pentium Extreme Edition
or CeleronD LGA775 processor at system bus speeds of 1066, 800 and 533 MHz.
Please refer to the motherboard specifi cations pages on our web site for updates
on supported processors.
Memory
The PDSM4+/PDSME+ has four 240-pin DIMM slots that can support up to 8 GB
of unbuffered ECC/non-ECC DDR2-667/533/400 SDRAM.
Onboard SCSI (5025M-4+ only)
Onboard SCSI is provided with an Adaptec AIC-7901 SCSI controller chip, which
supports dual channel, Ultra320 SCSI at a burst throughput rate of 320 MB/sec.
The PDSM4 provides two SCSI ports.
PCI Expansion Slots
The PDSM4+/PDSME+ has one PCI-Express x8 slot, one PCI-Express x4 slot, two
64-bit 133 MHz PCI-X slots and two 64-bit 100 MHz PCI slots (one functions as
a ZCR slot). The SC823 chassis accommodates up to seven low profi le add-on
cards.