Supero 5025M-4 Plus, User Manual

Page: 54 / 146

5-20
S
UPER
S
ERVER 5025M-4+/5025M-i+ User's Manual
5-11 Onboard Indicators
LAN LEDs
The Ethernet port has two LEDs. The
yellow (right) LED indicates activ-
ity while the left LED may be green,
amber or off to indicate the speed of
the connection. See the table on the
right for the functions associated with
the left (activity speed) LED.
JLAN Left LED
(Connection Speed Indicator)
LED Color Defi nition
Off 10 MHz
Green 100 MHz
Amber 1 GHz
USB Wake-Up
JPUSB1 and JPUSB2 are used to en-
able or disable USB Wake-Up, which
allows you to wakeup the system by
depressing a key on the keyboard or
by clicking the mouse when either is
connected to a USB port. The JPUSB
jumpers are used together with the
USB Wake-Up function in the BIOS.
Enable both the jumpers and the
BIOS setting to allow the system to
"wake-up via a USB device". See the
table on the right for jumper settings
and jumper connections. JPUSB1
is for USB1/2 and JPUSB2 is for the
USB3/4 headers.
USB Wake-Up
Jumper Settings
(JPUSB1/2)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
Note: The default jumper setting is
"Disabled". However, when the "USB
Wake-Up" function is enabled in
BIOS and the desired USB ports are
enabled via the JPUSB jumper, please
be sure to remove all USB devices
from the USB ports whose USB jump-
ers are set to "Disabled" before the
system goes into standby mode.
Keyboard Wake-Up
The JPWAKE jumper is used to al-
low the system to be woken up by
depressing a key on the keyboard
from an S1 or S3 state in Windows
OS. See the table on the right for
jumper settings. Your power supply
must meet ATX specifi cation 2.01 or
higher and supply 720 mA of standby
power to use this feature.
Keyboard Wake-Up
Jumper Settings
(JPWAKE)
Jumper Setting Defi nition
Pins 1-2 Disabled
Pins 2-3 Enabled