background image

C-10

S

UPER

S

ERVER 5025M-4+/5025M-i+ User's Manual

C-2  Installing the Windows XP/2000/2003 for systems 
with    RAID Functions

New Operating System-Windows XP/2000/2003 Installation

a. Insert Microsoft Windows XP/2000/2003 Setup CD in the CD Driver, and the 

system will start booting up from CD.

b. Press the <F6> key when the message-" Press F6 if you need to install a third 

party SCSI or RAID driver" displays.

c. When the Windows XP/2000/2003 Setup screen appears, press "S" to specify 

additional device(s).

d. Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ICH7R into Drive 

A: and press the <Enter> key.

e. Choose Intel(R)82801GR/GH 

SATA RAID Controller

 from the list indicated in  the 

XP/2000/2003 Setup Screen, and press the <Enter> key.

f. Press the <Enter> key to continue the installation process. (If you need to specify 

any additional devices to be installed, do it at this time.) Once all devices are speci-

fi ed, press the <Enter> key to continue with the installation.

g. From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The 

XP/2000/2003 Setup will automatically load all device fi les and then, continue the 

Windows XP/2000/2003 installation.

h. After Windows XP/2000/2003 Installation is completed, the system will automati-

cally reboot.

i. Insert Supermicro CD that came with the package into the CD Drive during system 

reboot, and the following screen will appear:

Note:

 the current version of the ICH7R SATA RAID Utility can only support Windows 

XP/2000/2003 Operating System.

Summary of Contents for 5025M-4 Plus



















































































































































Reviews: