Supero 2022TG-H6IBQRF, User Manual

Page: 59 / 122

Chapter 5: Advanced Motherboard Setup
5-9
To Install: Insert
module vertically and
press down until it
snaps into place.
Pay attention to the
alignment notch at
the bottom.
To Remove: Use
your thumbs to gently
push the release tabs
near both ends of the
module. This should
release it from the
slot.
Top View of DDR3 Slot
Release Tab Release Tab
Note: Notch should align with
the receptive key point on
the slot.
Notch Notch
Front View
Figure 5-2. Installing DIMM into Slot
Memory Population for Optimal Performance
-For a Motherboard with One CPU (CPU1) Installed
# DIMMS CPU Channel 1 Channel 2 Channel 3 Channel 4
4 DIMMs CPU1 P1-1A P1-2A P1-3A P1-4A
Memory Population for Optimal Performance
-For a Motherboard with Two CPUs (CPU1 & CPU2) Installed
# DIMMS CPU Channel 1 Channel 2 Channel 3 Channel 4
8 DIMMs
CPU1 P1-1A P1-2A P1-3A P1-4A
CPU2 P2-1A P2-2A P2-3A P2-4A
DIMM Module Population Configuration
For memory to work properly, follow the tables below for memory installation:
Per Channel DIMM Populations Options
DIMM Type DIMM A Max. MHz,
1.5V DIMMs
Max. MHz,
1.35V DIMMs
Max. GB/
Channel
UDIMM SR or DR 1866 MHz 1600 MHz 8 GB
Registered
DIMM
SR or DR 1866 MHz 1600 MHz 16 GB
QR 1333 MHz 1333 MHz 32 GB
LRDIMM QR 1333 MHz 32 GB