Supero 2022TG-H6IBQRF, User Manual

Page: 11 / 122

1-3
Chapter 1: Introduction
Graphics Controller
The H8DGT-HLIBQF/HLF features an integrated Matrox
®
G200 graphics controller
with 16 MB DDR2 memory.
InfiniBand
The 2022TG-H6IBQRF server includes a QDR (quad data rate) speed InfiniBand
QSFP connector. InfiniBand is a scalable serial communications link intended for
connecting processors with high-speed peripherals.
Other Features
Other onboard features that promote system health include voltage monitors,
auto-switching voltage regulators, chassis and CPU overheat sensors and virus
protection.
1-3 Server Chassis Features
The following is a general outline of the main features of the SC827 server chassis.
System Power
Each SC827 chassis model includes a high-efficiency 80 Plus Platinum certified
power supply, rated at 1620 Watts plus one redundant backup power supply.
In the unlikely event your power supply fails, replacement is simple and can be
accomplished without tools.
Note: Redundant power availability will vary by configuration.
SAS Subsystem
The SC827 supports up to twelve 3.5" hot-swap SAS/SATA drives in trays (3 for
each node). These drives are hot-swappable units and are connected to a backplane
that provides power and control. The backplane also provides drive activity LED
for each drive installed.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the drives.
Front Control Panel
SC827 models include four front panels on the handles of the chassis which control
each of the systems. Each control panel on the A+ Server 2022TG-H6IBQRF/H6RF