Supero 2022TG-H6IBQRF, User Manual

Page: 68 / 122

5-18
A+ SERVER
2022TG-H6IBQRF/H6RF USER'S MANUAL
5-10 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the Serial
port) have two LEDs. On each Gb LAN port,
one LED blinks to indicate activity while the
other may be green, amber or off to indicate
the speed of the connection. See the table
on the right for the functions associated with
the connection speed LED.
LAN LED
(Connection Speed Indicator)
LED Color Definition
Off 10 MHz
Green 100 MHz
Amber 1 GHz
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also included on
the H8DGT-HLIBQF/HLF serverboard. The
amber LED on the right of the IPMI LAN
port indicates activity, while the green
LED on the left indicates the speed of the
connection. See the table at right for more
information.
IPMI LED
The serverboard contains an IPMI LED
(DP1) located near the corner above the
PCI-E slots. When this LED is lit, it means a
connection is active for the built-in IPMI on
the serverboard.
Note:
This LED is not installed on non-IPMI
boards.
IPMI LED (DP1)
State System Status
On Active connection
Off No connection
IPMI LAN Link LED
(Left) & Activity LED (Right)
Color Status Definition
Green:
Solid
Link (Left) 100 Mb/s
Amber:
Blinking
Activity
(Right)
Active
InfiniBand Port Enable/Disable
(H8DGT-HLF only)
JIB1 enables or disables the InfiniBand port
on the H8DGT-HLF serverboard. The default
position is on pins 1 and 2 to enable the port.
See the table below for jumper settings.
InfiniBand Port
Jumper Enable (JIB1)
Jumper Settings
Jumper Setting Definition
Closed Enabled
Open Disabled