Supero 2022TG-H6IBQRF, User Manual

Page: 20 / 122

2-4
A+ SERVER 2022TG-H6IBQRF/H6RF USER'S MANUAL
2-5 Installing the System into a Rack
This section provides information on installing the SC827 chassis into a rack unit
with the quick-release rails provided. There are a variety of rack units on the market,
which may mean the assembly procedure will differ slightly. You should also refer
to the installation instructions that came with your rack unit.
NOTE: This rail will fit a rack between 26" and 33.5" deep.
Identifying the Sections of the Rack Rails
The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of three sections: an inner chassis rail which secures directly to
the chassis, an outer rail that secures to the rack, and a middle rail which extends
from the outer rail (see Figure 2-1). These assemblies are specifically designed for
the left and right side of the chassis.
2
1
4
Figure 2-1. Identifying the Outer Rail, Middle Rail and Inner Rails
(Left Rail Assembly Shown)
Left Rail Assembly
with Rails Retracted
Middle Rail
Inner Rail
This Side Faces
Outward
Outer Rail
Locking Tab
Locking Tabs
Each inner rail has a locking tab. This tab locks the chassis into place when installed
and pushed fully into the rack. These tabs also lock the chassis in place when fully
extended from the rack. This prevents the server from coming completely out of
the rack when the chassis is pulled out for servicing.
3