Supero 1022GG-TF, User Manual

Page: 10 / 122

1-2
A+ Server 1022GG-TF User's Manual
1-2 Serverboard Features
At the heart of the A+ Server 1022GG-TF are two H8DGG-QF dual processor
serverboards based upon two AMD SR5690 chipsets and one SP5100 Southbridge
chipset. Below are the main features of the serverboard.
Processors
The H8DGG-QF serverboard supports two AMD Opteron 6100 series
(AMD Socket G34 type) processors. Please refer to our web site for a complete
listing of supported processors (
www.supermicro.com ).
Memory
The serverboard has sixteen single/dual/tri/quad channel DIMM sockets that can
support up to 128 GB of ECC/Non-ECC UDIMM or up to 512 GB of ECC RDIMM
SDRAM (512/128 GB for the system). See Chapter 5 Section 6 for more details on
installing memory into the system.
Serial ATA
The South Bridge (SP5100) of the chipset includes a Serial ATA controller for six
Gb/s SATA drives. The hot-swappable SATA drives are connected to a backplane
that provides power, bus termination and configuration settings. RAID 0, 1 and 10
are supported. Refer to the support area of our web site for procedures on setting
up RAID on your system.
PCI Expansion Slots
The H8DGG-QF serverboard has two PCI-Express 2.0 x8 (in a x16) slots and three
PCI-Express 2.0 x16 slots. In the 1022GG-TF server configuration, a riser card is
pre-installed to support expansion cards.
The serverboard supports two double-width graphic processor units (GPUs) in place
of the full-height, full-width expansion cards.
Ethernet Ports
An Intel® network controller is integrated into each of the serverboards to support
two Gigabit LAN ports (100/1000Base-T/1000BaseTX, RJ45 output).