Supero 1022GG-TF, User Manual

Page: 3 / 122

Preface
iii
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the A+ Server 1022GG-TF.
Installation and maintenance should be performed by experienced technicians only.
The A+ Server 1022GG-TF is a 1U rackmount server based on the SC818G-1400BP
server chassis and the Supermicro H8DGG-QF serverboard.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the Super H8DGG-QF
serverboard and the SC818G-1400BP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the A+ Server 1022GG-TF
into a rack and check out the server configuration prior to powering up the system.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Warning Statements for AC Systems
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
server.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the H8DGG-QF serverboard,
including the locations and functions of connectors, headers and jumpers. Refer
to this chapter when adding or removing processors or main memory and when
reconfiguring the serverboard.
Chapter 6: Advanced Chassis Setup
Refer to Chapter 6 for detailed information on the SC818G-1400BP 1U rackmount
server chassis. You should follow the procedures given in this chapter when
installing, removing or reconfiguring SATA or peripheral drives and when replacing
system power supply units and cooling fans.
Preface