Supero 1022GG-TF, User Manual, Page: 86 / 122

6-8
A+ Server 1022GG-TF User's Manual
6-5 Installing the Air Shroud
Air shrouds concentrate airflow to maximize fan efficiency. The air shroud for the
SC818G chassis does not require screws to install.
Installing the Air Shroud
1. Position the air shroud in the chassis as illustrated below.
2. Lower the front of the air shroud over the fan tray, sliding the front notches
(C) over the pins on the fan tray (D).
Figure 6-6. Installing the Air Shroud
1
A
1
B
1
B
Checking the Air Flow
•
Make sure there are no wires or other objects obstructing the airflow in and
out of the server. Pull all excess cabling out of the airflow path.
•
Do not operate the server without all drive trays installed in the drive bays.
Use only recommended server parts.
•
The control panel LEDs inform you of the overall system status. See “Chapter
3 System Interface” for details on the LEDs and the control panel buttons.