Supero 1022GG-TF, User Manual

Page: 63 / 122

Chapter 5: Advanced Serverboard Setup
5-13
NIC2 (LAN2) LED
The LED connections for LAN2 are on pins
9 and 10 of JF1. Attach LAN LED cables to
display network activity. See the table on the
right for pin definitions.
HDD LED
The HDD LED connection is located on pins
13 and 14 of JF1. Attach the hard drive LED
cable here to display disk activity (for any
hard drives on the system). See the table on
the right for pin definitions
NIC1 LED
Pin Definitions
(JF1)
Pin# Definition
11 Activty
12 Link Up
NIC2 LED
Pin Definitions
(JF1)
Pin# Definition
9 Activty
10 Link Up
NIC1 (LAN1) LED
The LED connections for LAN1 are on pins
11 and 12 of JF1. Attach LAN LED cables to
display network activity. See the table on the
right for pin definitions.
Power On LED
The Power On LED connector is located
on pins 15 and 16 of JF1. This connection
is used to provide LED indication of power
being supplied to the system. See the table
on the right for pin definitions.
Power LED
Pin Definitions
(JF1)
Pin# Definition
15 5V Stby
16 Control
Overheat/Fan Fail LED (OH)
Connect an LED to the OH connection on
pins 7 and 8 of JF1 to provide advanced
warning of chassis overheating or fan failure.
Refer to the table on the right for pin defini -
tions and status indicators.
OH/Fan Fail LED
Pin Definitions
(JF1)
Pin# Definition
7 Vcc
8 Control
OH/Fan Fail
LED Status
State Indication
Solid Overheat
Blinking Fan fail
HDD LED
Pin Definitions
(JF1)
Pin# Definition
13 Vcc
14 HD Active