Supermicro SuperBlade SBI-7125W-S6, User Manual

Page: 14 / 94

SBI-7125W-S6 Blade Module User’s Manual
1-2
1-3 Blade Module Features
Table 1-1 lists the main features of the SBI-7125W-S6 blade module. See the
proceeding section for components typically included in a blade system and other
optional components. Specific details on the SBI-7125W-S6 blade module is found in
Chapter 4: "Blade Module Features" on page 4-1 .
Processors
The SBI-7125W-S6 blade module supports up to dual 771-pin Intel Xeon 5400/5300/
5200/5100/5000 series processors.
Refer to the Supermicro web site for a complete listing of supported processors ( http://
www.supermicro.com/products/superblade ). Please note that you will need to check the
detailed specifications of a particular blade module for a list of the CPUs it supports.
Details on installation of the processor into the SBI-7125W-S6 blade module are found
in
Chapter 3: "Setup and Installation" on page 3-1 .
Memory
The SBI-7125W-S6 blade module has eight 240-pin DIMM sockets that can support up
to 64 GB of ECC FBD (Fully Buffered DIMM) DDR2-800/667/533 SDRAM. Memory is
interleaved, which requires modules of the same size and speed to be installed in
groups (of two or three).
Please refer to the Supermicro web site for a list of supported memory
(
www.supermicro.com/products/superblade ). The detailed specifications for a blade
module will contain a link to a list of recommended memory sizes and manufacturers.
Details on installation of memory modules into the SBI-7125W-S6 blade module are
found in
Chapter 3: "Setup and Installation" on page 3-1 .
Table 1-1. SBI-7125W-S6 Blade Specification Features
Mainboard
B7DW3 (proprietary form factor)
Chassis Dimensions (HxWxD): 11.32” x 1.67” x 18.9”
Processors
Single or dual Intel
™
Xeon
®
5400/5300/5200/5100/5000 sequence
processors. Please refer to our web site for a complete listing of supported
processors.
FSB Speed 1600/1333/1066 MHz front side (system) bus speed
Chipset Intel 5400 MCH/ESB2
Graphics Controller ATI ES1000 with 32 MB graphics
BIOS 16 Mb Phoenix
®
Flash ROM
Memory Capacity
Eight 240-pin DIMM sockets supporting up to 64 GB of ECC FBD
DDR2-800/667/533 SDRAM.
SATA Controller LSI SAS 1078 controller for six Serial ATA drives
Hard Drive Bays Six (6) hot-swap drive bays for 2.5" SATA disk drives