Supermicro SuperBlade SBI-7125W-S6, User Manual

Page: 46 / 94

SBI-7125W-S6 Blade Module User’s Manual
5-8
2. In the S
ELECT
S
ERVER
window if the circle in the server icon is yellow instead of
green, it means that the server is running in a degraded state—for example,
because a disk drive used in a virtual disk has failed. If the circle is red, the storage
configuration in the server has failed.
Double-click the icon of the server that you want to access.
The S
ERVER
L
OGIN WINDOW
appears ( Figure 5-4 ).
Figure 5-4. Server Login Window
3. In the S
ERVER
L
OGIN
window do the following:
a. Select an access mode from the drop-down menu.
• Select F
ULL
A
CCESS
if you need to both view the current confi guration and
change the configuration.
• Select V
IEW
O
NLY
if you need to only view and monitor the configuration.
b. Enter your user name and password, and click L
OGIN
.
You must enter the root/administrator user name and password to use Full Access
mode. If your user name and password are correct for the Login mode you have
chosen, the main M
EGA
RAID S
TORAGE
M
ANAGER
window appears (see Figure 5-5 ).
NOTE: To access servers on a different subnet, type in the box at the bottom of
the screen the IP address of a server in the desired subnet where MegaRAID
Storage Manager software is running, and click U
PDATE
. If you check the
C
ONNECT TO REMOTE
F
RAMEWORK
box, you can also access a standalone
installation of MegaRAID Storage Manager software, if it has a network
connection.
NOTE: If the computer is networked, this is the login to the computer itself, not
the network login.