Supermicro SuperBlade SBI-7125W-S6, User Manual

Page: 50 / 94

SBI-7125W-S6 Blade Module User’s Manual
5-12
5-4 Configuration
You use MegaRAID Storage Manager software to create and modify storage
configurations. RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50, and RAID 60
storage configurations are supported.
Creating a New Storage Configuration
You can use the MegaRAID Storage Manager Configuration Wizard to create new
storage configurations. To open the MegaRAID Storage Manager Configuration Wizard,
select a controller in the left panel of the M
EGA
RAID S
TORAGE
M
ANAGER
window and
then select O
PERATIONS
J
A
DVANCED
O
PERATIONS
J
C
ONFIGURATION
J
C
ONFIGURATION
W
IZARD
.
The C
ONFIGURATION
W
IZARD
M
ODE
S
ELECTION
screen appears ( Figure 5-6 ).
Figure 5-6. Configuration Wizard Mode Selection Screen
WARNING: LSI recommends that you do not use both SAS and SATA drives in
the same array. Using different drive interfaces in this way could cause
unpredictable behavior, decreased performance, an increased error count, and
decreased MTBF.
NOTE: You cannot create or modify a storage confi guration unless you are
logged on with administrator privileges.