Supermicro SuperBlade SBI-7125W-S6, User Manual

Page: 55 / 94

5-17
Chapter 5: RAID Setup Procedure
6. Click N
EXT
to continue to the next screen.
7. Check the configuration that you have just defined. If it is acceptable, click F
INISH
. If
you want to change something, click B
ACK
to return to the previous screens.
Using Manual Confi guration: RAID 0
Follow these steps to create a RAID 0 storage confi guration using the M
ANUAL
C
ONFIGURATION
mode of the Configuration Wizard. Figure 5-10 shows the first, A
RRAY
S
ELECTION
screen, that appears when you select M
ANUAL
C
ONFIGURATION
.
Figure 5-10. Array Selection Screen
1. In the A
RRAY
S
ELECTION
screen, select two or more available drives in the left panel.
Click the R
IGHT
A
RROW
button to move the selected drives to the right panel.
2. Click A
CCEPT
to accept these drives for the new RAID 0 array.
NOTE: You could do this to leave capacity available for other virtual disks that
you create later.
NOTE: MegaRAID Storage Manager software will not allow you to select the
disk drive on which the operating system is installed or any other drives that are
already part of a confi guration.