Supermicro SuperBlade SBI-7125W-S6, User Manual

Page: 75 / 94

6-11
Chapter 6: BIOS
X
DMI Event Logging Access the submenu to make changes to the following settings.
Event Log Validity This is a display to inform you of the event log validity. It is not a setting.
Event Log
Capacity
This is a display to inform you of the event log capacity. It is not a setting.
View DMI Event
Log
Highlight this item and press <Enter> to view the contents of the event log.
Event Logging This setting allows you to Enable or Disable event logging.
ECC Event
Logging
This setting allows you to Enable or Disable ECC event logging.
Mark DMI Events
as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear All DMI
Event Logs Select Yes and press <Enter> to clear all DMI event logs. The options are Yes
and
No .
Table 6-10. Console Redirection Submenu Menu Options
Menu Option Description
COM Port Address
This item allows you to specify to redirect the console to Onboard COM A or
Onboard COM B. This setting can also be
Disabled .
BAUD Rate
This item allows you to select the BAUD rate for console redirection. The options
are 300, 1200, 2400, 9600,
19.2K , 38.4K, 57.6K, and 115.2K.
Console Type
This item allows you to choose from the available options to select the console
type for console redirection. The options are VT100, VT100 (8bit), PC-ANSI
(7bit),
PC ANSI , VT100+, and VT-UTF8.
Flow Control
This item allows you to choose from the available options to select the flow
control for console redirection. The options are: None, XON/XOFF, and
CTS/
RTS .
Console Connection
This item allows you to choose select the console connection: either Direct or
Via Modem.
Continue CR after
POST Choose whether to continue with console redirection after the POST routine. The
options are On and
Off .
Table 6-9. I/O Device Configuration Submenu Menu Options (Continued)
Menu Option Description